The equally efficient thermal coffin cover was designed to insulate and protect coffins and their contents during road transport. They are particularly useful in countries where in the summer temperatures often rise above 30°C.

Thermal blankets can also be used around young plants and seedlings as a ground cover to protect against frost in winter and excessive heat in summer.

The Thermal Truck Partition enables one transporter or truck to carry mixed multi-temperature loads of goods in refrigerated transport; for example mixed in one load can be frozen, chilled and general dry goods. Each set of goods is ‘partitioned’ depending on the need to maintain the correct temperature during transportation. This solution is widely used in the meat, fish, chicken and grocery supply chain. Thermal partition walls are lightweight and easy for a single individual to erect and move to assist off-loading or to lessen the area to be chilled, using the Gas Spring T-Bar system. Further a South African version has been developed called the Movable Thermal Truck Partition. This can be retro-fitted to any size truck body and moves the full length of it on rollers and is stored in the roof of the vehicle on a mechanism not unlike a lift-up garage door. The insulation is fitted into the lightweight aluminium frame and can contain a doorway or flap to allow for offloading access. Both variants create a marked saving in fuel and energy costs. Despite their lightweight construction the materials are extremely tough and hardwearing. Please use the contacts page to get more information on this remarkable new development.

They are also useful during power outages as they “lock in” the cold air for long periods. They are lightweight, easy to clean and store.

The standard set is composed of:

4 pces. cross mats – L 6,18m x  W 2,5m

2 pces. end mats -  H 2,5m x  W 2,5m (2,9m)

The set can be manufactured in either size

These are similar to the Thermally Insulated Pallet Covers but are designed to be used specifically for use with air cargo. The size and the configuration is somewhat different from the standard pallet cover but the use of Velcro to seal the splits, the materials and the Polywool® are very similar. Also it is supplied in two pieces; a top and bottom element to ensure absolute insulation. Again these covers can be made to client specification in regards to thickness of insulation. Where temperature maintenance of sensitive or perishable products on the tarmac and in the air is important, then the Thermally Insulated Air Cargo Cover is the answer.

The air cargo variant of this product is manufactured to a range of sizes that will fit the cargo holds of any aircraft. Thermal pallet covers stabilize cargo temperature, prevent rain and ultra-violet damage, keep products clean and free from cross contamination and reduce the risk of pilferage by keeping the contents hidden from view. They can also be used to isolate perishables in refrigerated transport where cold temperatures are harmful to temperature sensitive products e.g. bananas and avocado pears. Using thermal pallet covers also assists in saving fuel and energy. Used as a stand alone solution in non-refrigerated transport they also work very effectively.

The duvet cover is made with reinforced edging and eyelets are positioned around the edges. They have been tested by the Danish Technological Institute, the Swedish National Institute and the UK Department of Roads and meet their stringent requirements. Without the duvet cover asphalt can lose up to 20 to 25% of its temperature per hour. With the duvet cover that figure drops dramatically to 8% even in cold European conditions. It is easy to clean, durable and simple to store. Amortised over 5 years it is extremely cost effective.

The equally efficient thermal coffin cover was designed to insulate and protect coffins and their contents during road transport. They are particularly useful in countries where in the summer temperatures often rise above 30°C.